wrh/chrg
1
0
Fork 0
forked from chrg/chrg
Code Pull Requests Activity

chore: 关闭部分调试打印并更新充电负载配置

Browse Source 
1.  修改apps/chrg/applications/thread/chrg_north.c，注释掉调试日志打印，同时将DEBUG_NORTH宏默认值改为0关闭该调试开关
2.  修改rt-thread/components/fal/src/fal_rtt.c，注释掉flash读写对比的调试打印
3.  更新apps/chrg/applications/utils/chrg_sink.c的负载控制逻辑，新增短路测试保持时间配置，调整寄存器下发数组长度和初始化参数
This commit is contained in:
wrh
2026-07-21 15:48:16 +08:00
parent 82847e41dd
commit 25b378775d
4 changed files with 18 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files
apps/chrg/applications/thread/chrg_north.c
+1 -1
View File
@@ -220,7 +220,7 @@ void chrg_sink_parse(rt_uint8_t *frame_data, eIDX_SOU_CH idx,
pSW->VF = ((frame_data[16] << 8) | frame_data[17]);
#if DEBUG_NORTH
LOG_D("Sink[%d] real volt: %d mV", idx, volt_mv);
// LOG_D("Sink[%d] real volt: %d mV", idx, volt_mv);
#endif
if(pSW->sink.On_work == 1 && pSW->sink.test.test_mode == 0) {
apps/chrg/applications/thread/chrg_north.h
+1 -1
View File
@@ -22,7 +22,7 @@
#define LEN_FRAME_HEAD (3) // [帧长, 0x00, id]
#define MIN_FRAME_LENGTH (5) // 帧最短5字节
#define WORK_MIN_VOLT 3000 // 工作电压下限，单位mV
#define DEBUG_NORTH 0x01 // 0 = 关闭，1 = 开启
#define DEBUG_NORTH 0x00 // 0 = 关闭，1 = 开启
#define LCD_OPEN 0x01 // 0为关闭屏幕显示 1为打开
#define TRIM_NORTH 0x00 // 0 = 关闭, 1 = 开启
#define SINK_TEST_DEBUG 0x00 // 0 = 关闭，1 = 开启
apps/chrg/applications/utils/chrg_sink.c
+15 -8
View File
@@ -448,9 +448,9 @@ static int chrg_sink_work_init(eIDX_SOU_CH idx, struct chrg_switch_t *pSW)
{
struct chrg_south_t *pSOU = &chrgsouth;
struct chrg_north_t *pNOR = &chrgnorth;
rt_uint16_t regs[4] = {REG_CURRENT_OUT + 1, REG_MODE, 0, 0};
rt_uint16_t vals[4] = {0, pSW->CV_mode, 0, 0};
rt_uint8_t count = 2;
rt_uint16_t regs[5] = {REG_CURRENT_OUT + 1, REG_MODE,Eload_Start_V_ON,0, 0};
rt_uint16_t vals[5] = {0, pSW->CV_mode,pSW->sink.volt_on, 0, 0};
rt_uint8_t count = 3;
if (pSW->sink.test.test_mode_old == 1) {
regs[count] = ModbusRTU_ShortTest_CMD_MODE_FLAG;
@@ -546,10 +546,18 @@ static int chrg_sink_TEST_DYNA_ON(rt_uint8_t ch, struct chrg_switch_t *pSW)
//短路测试启动
static int chrg_sink_TEST_SHORT_ON(rt_uint8_t ch, struct chrg_switch_t *pSW)
{
rt_uint16_t regs[2] = {ModbusRTU_ShortTest_CMD_MODE_FLAG, REG_WORK};
rt_uint16_t vals[2] = {ModbusRTU_DYNA_CMD_MODE_RUN_ALWAYS_KEPP, WORK_START};
return chrg_sou_com_batch_submit((eIDX_SOU_CH)ch, regs, vals, 2);
rt_uint16_t regs[3] = {ModbusRTU_ShortTest_Hold_Time,ModbusRTU_ShortTest_CMD_MODE_FLAG, REG_WORK};
rt_uint16_t vals[3] = {0,0,0};
if(pSW->sink.test.short_test.set_mode == 0)
{
vals[0] = pSW->sink.test.short_test.hold_time;
vals[1] = ModbusRTU_DYNA_CMD_MODE_RUN_NO_CURR;
}
else{
vals[1] = ModbusRTU_DYNA_CMD_MODE_RUN_ALWAYS_KEPP;
}
vals[2] = WORK_START;
return chrg_sou_com_batch_submit((eIDX_SOU_CH)ch, regs, vals, 3);
}
@@ -564,7 +572,6 @@ int chrg_sink_work(eIDX_SOU_CH idx, struct chrg_switch_t *pSW)
return -1;
}
work_mode = pSW->sink.work_mode;
// 本次状态和上次一致，直接跳过，不重复下发寄存器
if (work_mode == last_state[idx]) {
return 0;