wrh
d9a8c359c0
1. apps/chrg/applications/thread/chrg_comm.c: 新增通道配置版本递增逻辑，避免旧回码干扰新配置
2. apps/chrg/applications/thread/chrg_north.h: 更新config_version注释，补充用途说明
3. apps/chrg/applications/thread/chrg_north.c: 重构帧头解析函数，新增缓冲区操作辅助函数和通道切换复位逻辑
4. apps/chrg/applications/thread/chrg_roll_nor.c:
- 新增超时、重发等宏定义
- 重构协议设置函数，增加返回值处理
- 新增回码匹配校验、邮箱清理、等待响应等辅助函数
- 重构自动请求逻辑，增加重试和配置版本校验
- 简化线程入口处理逻辑，统一回码释放流程
5. apps/chrg/codex_build.log: 记录本次编译的代码尺寸变化
311 lines
14 KiB
PowerShell
311 lines
14 KiB
PowerShell
param(
|
||
[string]$OutputDirectory = 'D:\HC-PMP-SW\Power_ControlPannel\MP_Control_sw_405\拖拽式平台\docs'
|
||
)
|
||
|
||
$ErrorActionPreference = 'Stop'
|
||
|
||
function New-Criteria {
|
||
param([int]$VoltageToleranceMv, [int]$CurrentToleranceMa)
|
||
[ordered]@{
|
||
VoltageToleranceMv = $VoltageToleranceMv
|
||
CurrentToleranceMa = $CurrentToleranceMa
|
||
ShortVoltageMinMv = 0
|
||
ShortVoltageMaxMv = 1000
|
||
ShortCurrentMinMa = 0
|
||
ShortCurrentMaxMa = 1000
|
||
OcpVoltageMinMv = 0
|
||
OcpVoltageMaxMv = 5000
|
||
OcpCurrentMinMa = 4500
|
||
OcpCurrentMaxMa = 5500
|
||
DynamicVpkPlusMinMv = 0
|
||
DynamicVpkPlusMaxMv = 65535
|
||
DynamicVpkMinusMinMv = 0
|
||
DynamicVpkMinusMaxMv = 65535
|
||
}
|
||
}
|
||
|
||
function New-DmpItem {
|
||
param(
|
||
[string]$Name,
|
||
[int]$Channel,
|
||
[string]$Protocol,
|
||
[int]$VoltageMv,
|
||
[int]$ProtocolCurrentMa,
|
||
[int]$LoadCurrentMa,
|
||
[int]$VoltageToleranceMv,
|
||
[int]$CurrentToleranceMa,
|
||
[int]$QueryDelayMs,
|
||
[string]$OutputAction = 'Start',
|
||
[int]$Gear = 0,
|
||
[int]$CcSelection = -1,
|
||
[string]$SinkFunction = 'StandardLoad'
|
||
)
|
||
|
||
[ordered]@{
|
||
Id = [guid]::NewGuid().ToString()
|
||
Name = $Name
|
||
Channel = $Channel
|
||
Direction = 'Sink'
|
||
OutputAction = $OutputAction
|
||
Protocol = $Protocol
|
||
Mode = 'ConstantCurrent'
|
||
PdoType = 'Fpdo'
|
||
SinkFunction = $SinkFunction
|
||
Gear = $Gear
|
||
CcSelection = if ($CcSelection -ge 0) { $CcSelection } elseif ($Channel -eq 2) { 1 } else { 0 }
|
||
MinVoltageMv = 3300
|
||
VoltageMv = $VoltageMv
|
||
CurrentMa = $ProtocolCurrentMa
|
||
LoadVoltageMv = $VoltageMv
|
||
LoadCurrentMa = $LoadCurrentMa
|
||
VonVoltageMv = 100
|
||
ShortHoldTimeMs = 1000
|
||
HoldAfterTest = $false
|
||
OcpStartCurrentMa = 1000
|
||
OcpEndCurrentMa = 5000
|
||
OcpStepCurrentMa = 100
|
||
OcpStepTimeMs = 10
|
||
OcpRecoveryTimeMs = 1000
|
||
OcpStopVoltageMv = 4000
|
||
OcpRecoveryWithLoad = $true
|
||
DynamicCurrent1Ma = 1000
|
||
DynamicTime1 = 100
|
||
DynamicCurrent2Ma = 5000
|
||
DynamicTime2 = 100
|
||
DynamicRiseSlope = 1
|
||
DynamicFallSlope = 1
|
||
ApplyDelayMs = 500
|
||
QueryDelayMs = $QueryDelayMs
|
||
DurationMs = 1000
|
||
StopOnFault = $true
|
||
Criteria = New-Criteria $VoltageToleranceMv $CurrentToleranceMa
|
||
Status = 'Pending'
|
||
Result = ''
|
||
Verdict = ''
|
||
MeasuredVoltageMv = $null
|
||
MeasuredCurrentMa = $null
|
||
QueryTime = $null
|
||
Measurements = @()
|
||
}
|
||
}
|
||
|
||
function New-PortConfig {
|
||
param(
|
||
[string]$Port,
|
||
[int]$Channel,
|
||
[string]$Protocol,
|
||
[int]$VoltageMv,
|
||
[int]$ProtocolCurrentMa,
|
||
[int]$LoadCurrentMa,
|
||
[int]$VoltageToleranceMv,
|
||
[int]$CurrentToleranceMa,
|
||
[int]$Gear = 0
|
||
)
|
||
[pscustomobject]@{
|
||
Port = $Port
|
||
Channel = $Channel
|
||
Protocol = $Protocol
|
||
VoltageMv = $VoltageMv
|
||
ProtocolCurrentMa = $ProtocolCurrentMa
|
||
LoadCurrentMa = $LoadCurrentMa
|
||
VoltageToleranceMv = $VoltageToleranceMv
|
||
CurrentToleranceMa = $CurrentToleranceMa
|
||
Gear = $Gear
|
||
}
|
||
}
|
||
|
||
function Add-SingleTest {
|
||
param(
|
||
[System.Collections.Generic.List[object]]$Items,
|
||
[string]$Prefix,
|
||
[pscustomobject]$Config,
|
||
[int]$CcSelection = -1
|
||
)
|
||
$voltage = $Config.VoltageMv / 1000
|
||
$current = $Config.LoadCurrentMa / 1000
|
||
$Items.Add((New-DmpItem "$Prefix-$($Config.Port)-$voltage`V-$current`A" $Config.Channel $Config.Protocol `
|
||
$Config.VoltageMv $Config.ProtocolCurrentMa $Config.LoadCurrentMa `
|
||
$Config.VoltageToleranceMv $Config.CurrentToleranceMa 10000 'Start' $Config.Gear $CcSelection))
|
||
$Items.Add((New-DmpItem "$Prefix-$($Config.Port)-停止" $Config.Channel $Config.Protocol `
|
||
$Config.VoltageMv $Config.ProtocolCurrentMa $Config.LoadCurrentMa 0 0 1000 'Stop' $Config.Gear $CcSelection))
|
||
}
|
||
|
||
function Add-SequencedPortTest {
|
||
param(
|
||
[System.Collections.Generic.List[object]]$Items,
|
||
[string]$Face,
|
||
[int]$CcSelection,
|
||
[pscustomobject]$Case,
|
||
[string]$Port,
|
||
[int]$Channel
|
||
)
|
||
|
||
$sinkFunction = if ($Case.SinkFunction) { $Case.SinkFunction } else { 'StandardLoad' }
|
||
$namePrefix = "$Face-$($Case.Label)-$Port"
|
||
$start = New-DmpItem "$namePrefix-启动" $Channel $Case.Protocol $Case.Voltage `
|
||
$Case.ProtocolCurrent $Case.LoadCurrent $Case.VTol $Case.ITol 5000 'Start' 0 $CcSelection $sinkFunction
|
||
if ($sinkFunction -eq 'ShortCircuit') {
|
||
$start.Criteria.ShortVoltageMinMv = 0
|
||
$start.Criteria.ShortVoltageMaxMv = 3000
|
||
$start.Criteria.ShortCurrentMinMa = 0
|
||
$start.Criteria.ShortCurrentMaxMa = 65535
|
||
}
|
||
$Items.Add($start)
|
||
$Items.Add((New-DmpItem "$namePrefix-停止" $Channel $Case.Protocol $Case.Voltage `
|
||
$Case.ProtocolCurrent $Case.LoadCurrent 0 0 5000 'Stop' 0 $CcSelection $sinkFunction))
|
||
}
|
||
|
||
function Add-CombinationTest {
|
||
param(
|
||
[System.Collections.Generic.List[object]]$Items,
|
||
[string]$Prefix,
|
||
[object[]]$Configs
|
||
)
|
||
|
||
foreach ($config in $Configs) {
|
||
$Items.Add((New-DmpItem "$Prefix-$($config.Port)-配置" $config.Channel $config.Protocol `
|
||
$config.VoltageMv $config.ProtocolCurrentMa $config.LoadCurrentMa 0 0 100 'Start' $config.Gear))
|
||
}
|
||
for ($index = 0; $index -lt $Configs.Count; $index++) {
|
||
$config = $Configs[$index]
|
||
$delay = if ($index -eq 0) { 10000 } else { 1000 }
|
||
$Items.Add((New-DmpItem "$Prefix-$($config.Port)-验证" $config.Channel $config.Protocol `
|
||
$config.VoltageMv $config.ProtocolCurrentMa $config.LoadCurrentMa `
|
||
$config.VoltageToleranceMv $config.CurrentToleranceMa $delay 'Start' $config.Gear))
|
||
}
|
||
foreach ($config in $Configs) {
|
||
$Items.Add((New-DmpItem "$Prefix-$($config.Port)-停止" $config.Channel $config.Protocol `
|
||
$config.VoltageMv $config.ProtocolCurrentMa $config.LoadCurrentMa 0 0 1000 'Stop' $config.Gear))
|
||
}
|
||
}
|
||
|
||
function Write-Plan {
|
||
param([string]$FileName, [string]$Name, [System.Collections.Generic.List[object]]$Items)
|
||
$plan = [ordered]@{
|
||
ProductId = 'DMP'
|
||
Name = $Name
|
||
Communication = [ordered]@{
|
||
PortName = 'COM6'
|
||
BaudRate = 115200
|
||
DataBits = 8
|
||
Parity = 'None'
|
||
StopBits = 1
|
||
SlaveAddress = 1
|
||
TimeoutMs = 500
|
||
RetryCount = 2
|
||
}
|
||
Items = $Items
|
||
}
|
||
$path = Join-Path $OutputDirectory $FileName
|
||
$json = $plan | ConvertTo-Json -Depth 20
|
||
[System.IO.File]::WriteAllText($path, $json, [System.Text.UTF8Encoding]::new($false))
|
||
Get-Item -LiteralPath $path
|
||
}
|
||
|
||
$c1 = 1
|
||
$c2 = 2
|
||
$a1 = 3
|
||
|
||
# 1. C1/C2同时插入，但依次对单个通道带载。先测A面(CC1)，再测B面(CC2)。
|
||
$items = [System.Collections.Generic.List[object]]::new()
|
||
$dualCases = @(
|
||
[pscustomobject]@{ Label = '5V3A'; Protocol = 'Standard'; Voltage = 5000; ProtocolCurrent = 3000; LoadCurrent = 3000; VTol = 240; ITol = 300; SinkFunction = 'StandardLoad' },
|
||
[pscustomobject]@{ Label = '5V3.8A过载'; Protocol = 'Standard'; Voltage = 5000; ProtocolCurrent = 3000; LoadCurrent = 3800; VTol = 0; ITol = 0; SinkFunction = 'StandardLoad' },
|
||
[pscustomobject]@{ Label = '5V0A空载'; Protocol = 'Standard'; Voltage = 5000; ProtocolCurrent = 3000; LoadCurrent = 0; VTol = 240; ITol = 0; SinkFunction = 'StandardLoad' },
|
||
[pscustomobject]@{ Label = '5V-QC2.0'; Protocol = 'Qc20'; Voltage = 5000; ProtocolCurrent = 3000; LoadCurrent = 0; VTol = 240; ITol = 0; SinkFunction = 'StandardLoad' },
|
||
[pscustomobject]@{ Label = '5V短路'; Protocol = 'Standard'; Voltage = 5000; ProtocolCurrent = 3000; LoadCurrent = 0; VTol = 0; ITol = 0; SinkFunction = 'ShortCircuit' },
|
||
[pscustomobject]@{ Label = '5V0A短路恢复'; Protocol = 'Standard'; Voltage = 5000; ProtocolCurrent = 3000; LoadCurrent = 0; VTol = 240; ITol = 0; SinkFunction = 'StandardLoad' },
|
||
[pscustomobject]@{ Label = '9V3A'; Protocol = 'Pdo'; Voltage = 9000; ProtocolCurrent = 3000; LoadCurrent = 3000; VTol = 440; ITol = 300; SinkFunction = 'StandardLoad' },
|
||
[pscustomobject]@{ Label = '15V3A'; Protocol = 'Pdo'; Voltage = 15000; ProtocolCurrent = 3000; LoadCurrent = 3000; VTol = 740; ITol = 300; SinkFunction = 'StandardLoad' },
|
||
[pscustomobject]@{ Label = '20V2.25A'; Protocol = 'Pdo'; Voltage = 20000; ProtocolCurrent = 2250; LoadCurrent = 2250; VTol = 790; ITol = 225; SinkFunction = 'StandardLoad' },
|
||
[pscustomobject]@{ Label = '20V0A空载'; Protocol = 'Pdo'; Voltage = 20000; ProtocolCurrent = 2250; LoadCurrent = 0; VTol = 790; ITol = 0; SinkFunction = 'StandardLoad' },
|
||
[pscustomobject]@{ Label = '20V2.82A过载'; Protocol = 'Pdo'; Voltage = 20000; ProtocolCurrent = 2250; LoadCurrent = 2820; VTol = 0; ITol = 0; SinkFunction = 'StandardLoad' }
|
||
)
|
||
foreach ($face in @(
|
||
[pscustomobject]@{ Name = 'A面'; CcSelection = 1 },
|
||
[pscustomobject]@{ Name = 'B面'; CcSelection = 2 }
|
||
)) {
|
||
foreach ($case in $dualCases) {
|
||
Add-SequencedPortTest $items $face.Name $face.CcSelection $case 'C1' $c1
|
||
Add-SequencedPortTest $items $face.Name $face.CcSelection $case 'C2' $c2
|
||
}
|
||
}
|
||
Write-Plan '01_C1-C2双口同时插入测试.json' '01 C1/C2双口同时插入、依次单口负载测试' $items
|
||
|
||
# 2. A1单口：5V标准，9V/12V使用QC2.0。
|
||
$items = [System.Collections.Generic.List[object]]::new()
|
||
$a1Cases = @(
|
||
[pscustomobject]@{ Label = '264VAC'; Protocol = 'Standard'; Voltage = 5000; Current = 3000; VTol = 240; ITol = 300 },
|
||
[pscustomobject]@{ Label = '264VAC'; Protocol = 'Qc20'; Voltage = 9000; Current = 2000; VTol = 440; ITol = 200 },
|
||
[pscustomobject]@{ Label = '264VAC'; Protocol = 'Qc20'; Voltage = 12000; Current = 1500; VTol = 590; ITol = 150 },
|
||
[pscustomobject]@{ Label = '90VAC'; Protocol = 'Standard'; Voltage = 5000; Current = 3000; VTol = 240; ITol = 300 },
|
||
[pscustomobject]@{ Label = '90VAC'; Protocol = 'Qc20'; Voltage = 12000; Current = 1500; VTol = 590; ITol = 150 }
|
||
)
|
||
foreach ($case in $a1Cases) {
|
||
Add-SingleTest $items $case.Label (New-PortConfig 'A1' $a1 $case.Protocol $case.Voltage `
|
||
$case.Current $case.Current $case.VTol $case.ITol)
|
||
}
|
||
Add-SingleTest $items 'SCP-10V2.25A' (New-PortConfig 'A1' $a1 'Scp' 10000 2250 2250 490 225)
|
||
Write-Plan '02_A1单口测试.json' '02 A1单口测试' $items
|
||
|
||
# 3. C1/C2单口多协议。先测A面(CC1)，再测B面(CC2)。
|
||
# PPS3-5没有规格值，仅做9V空载握手，避免未确认的大电流带载。
|
||
$items = [System.Collections.Generic.List[object]]::new()
|
||
$multiProtocolCases = @(
|
||
[pscustomobject]@{ Label = '标准5V3A'; Protocol = 'Standard'; Gear = 0; Voltage = 5000; ProtocolCurrent = 3000; LoadCurrent = 3000; VTol = 240; ITol = 300 },
|
||
[pscustomobject]@{ Label = 'PDO9V3A'; Protocol = 'Pdo'; Gear = 0; Voltage = 9000; ProtocolCurrent = 3000; LoadCurrent = 3000; VTol = 440; ITol = 300 },
|
||
[pscustomobject]@{ Label = 'PDO15V3A'; Protocol = 'Pdo'; Gear = 0; Voltage = 15000; ProtocolCurrent = 3000; LoadCurrent = 3000; VTol = 740; ITol = 300 },
|
||
[pscustomobject]@{ Label = 'PDO20V2.25A'; Protocol = 'Pdo'; Gear = 0; Voltage = 20000; ProtocolCurrent = 2250; LoadCurrent = 2250; VTol = 790; ITol = 225 },
|
||
[pscustomobject]@{ Label = 'PPS1-9V4.5A'; Protocol = 'Pps'; Gear = 1; Voltage = 9000; ProtocolCurrent = 4500; LoadCurrent = 4500; VTol = 450; ITol = 225 },
|
||
[pscustomobject]@{ Label = 'PPS2-19V2A'; Protocol = 'Pps'; Gear = 2; Voltage = 19000; ProtocolCurrent = 2000; LoadCurrent = 2000; VTol = 950; ITol = 150 },
|
||
[pscustomobject]@{ Label = 'PPS3-9V空载握手'; Protocol = 'Pps'; Gear = 3; Voltage = 9000; ProtocolCurrent = 1000; LoadCurrent = 0; VTol = 450; ITol = 100 },
|
||
[pscustomobject]@{ Label = 'PPS4-9V空载握手'; Protocol = 'Pps'; Gear = 4; Voltage = 9000; ProtocolCurrent = 1000; LoadCurrent = 0; VTol = 450; ITol = 100 },
|
||
[pscustomobject]@{ Label = 'PPS5-9V空载握手'; Protocol = 'Pps'; Gear = 5; Voltage = 9000; ProtocolCurrent = 1000; LoadCurrent = 0; VTol = 450; ITol = 100 }
|
||
)
|
||
$avsCases = @(
|
||
[pscustomobject]@{ Label = 'AVS-9V3A'; Protocol = 'Avs'; Gear = 0; Voltage = 9000; ProtocolCurrent = 3000; LoadCurrent = 3000; VTol = 150; ITol = 300 },
|
||
[pscustomobject]@{ Label = 'AVS-20V2.25A'; Protocol = 'Avs'; Gear = 0; Voltage = 20000; ProtocolCurrent = 2250; LoadCurrent = 2250; VTol = 650; ITol = 225 }
|
||
)
|
||
$cPorts = @([pscustomobject]@{ Name = 'C1'; Channel = $c1 }, [pscustomobject]@{ Name = 'C2'; Channel = $c2 })
|
||
foreach ($face in @(
|
||
[pscustomobject]@{ Name = 'A面'; CcSelection = 1 },
|
||
[pscustomobject]@{ Name = 'B面'; CcSelection = 2 }
|
||
)) {
|
||
foreach ($case in $multiProtocolCases) {
|
||
foreach ($port in $cPorts) {
|
||
Add-SingleTest $items "$($face.Name)-$($case.Label)" (New-PortConfig $port.Name $port.Channel $case.Protocol `
|
||
$case.Voltage $case.ProtocolCurrent $case.LoadCurrent $case.VTol $case.ITol $case.Gear) $face.CcSelection
|
||
}
|
||
}
|
||
foreach ($case in $avsCases) {
|
||
Add-SingleTest $items "$($face.Name)-$($case.Label)" (New-PortConfig 'C1' $c1 $case.Protocol `
|
||
$case.Voltage $case.ProtocolCurrent $case.LoadCurrent $case.VTol $case.ITol $case.Gear) $face.CcSelection
|
||
}
|
||
}
|
||
Write-Plan '03_C1-C2单口多协议测试.json' '03 C1/C2单口多协议A/B面测试（含PPS1~5、AVS）' $items
|
||
|
||
# 4. 两口组合：只有20V项目使用PDO，其余5V均为标准协议。
|
||
$items = [System.Collections.Generic.List[object]]::new()
|
||
Add-CombinationTest $items '组合1-C1+C2' @(
|
||
(New-PortConfig 'C1' $c1 'Pdo' 20000 1500 1500 990 150),
|
||
(New-PortConfig 'C2' $c2 'Standard' 5000 3000 3000 240 300)
|
||
)
|
||
Add-CombinationTest $items '组合2-C1+A1' @(
|
||
(New-PortConfig 'C1' $c1 'Pdo' 20000 1500 1500 990 150),
|
||
(New-PortConfig 'A1' $a1 'Standard' 5000 3000 3000 240 300)
|
||
)
|
||
Add-CombinationTest $items '组合3-C2+A1' @(
|
||
(New-PortConfig 'C2' $c2 'Standard' 5000 1500 1500 240 150),
|
||
(New-PortConfig 'A1' $a1 'Standard' 5000 1500 1500 240 150)
|
||
)
|
||
Write-Plan '04_两口组合输出测试.json' '04 两口组合输出测试' $items
|
||
|
||
# 5. 三口组合：C1为PD 20V，C2/A1为标准5V。
|
||
$items = [System.Collections.Generic.List[object]]::new()
|
||
Add-CombinationTest $items '三口组合-C1+C2+A1' @(
|
||
(New-PortConfig 'C1' $c1 'Pdo' 20000 1500 1500 990 150),
|
||
(New-PortConfig 'C2' $c2 'Standard' 5000 1500 1500 240 150),
|
||
(New-PortConfig 'A1' $a1 'Standard' 5000 1500 1500 240 150)
|
||
)
|
||
Write-Plan '05_C1-C2-A1三口组合输出测试.json' '05 C1/C2/A1三口组合输出测试' $items
|